] Filters: Type is Papers in Scientific Journals [Clear All Filters]
"A convenient synthesis of threo-4-amino-3, 4-diphenylbutanoic acid and its derivatives ",
Journal of Chemical Research(S), vol. 2, pp. 89, 2003.
"Stereoselective synthesis of new coumarin and N-methylcarbazole retinoic acid analogs ",
Journal of the Indian Chemical Society, vol. 80, issue 6, pp. 650, 2003.
" Editorial on Tissue Engineering",
J. Materials Science: Materials in Medicine, vol. 14, pp. 3-4, 2003.
"Editorial Overview: Biomimetics",
Current Opinion in Solid State and materials Science, vol. 7, pp. 263-264, 2003.
"Bi-Composite Sandwich Mouldings: Processing, Mechanical Performance and Bioactive Behaviour",
Journal of Materials: Materials in Medicine, vol. 14, pp. 385-397, 2003.
"Coupling of HDPE/Hydroxyapatite Composites by Silane Based Methodologies",
Journal of Materials: Materials in Medicine, vol. 14, pp. 475-487, 2003.
"Structural Development of HDPE in Injection Moulding",
Journal of Applied Polymer Science, vol. 89, pp. 2079-2087, 2003.
"Analysis of the thermal environment inside the furnace of a dynamic mechanical analyser",
Polymer Testing, vol. 22, pp. 471, 2003.
"Study of the viscoelastic properties of PET by thermally stimulated recovery",
Plast. Rubb. Compos. Applic, vol. 32, pp. 281, 2003.
"Bi-Composite Sandwich Mouldings: Processing, Mechanical Performance and Bioactive Behaviour",
Journal of Materials Science: Materials in Medicine, vol. 14, pp. 385-397, 2003.
"Preliminary Study on Human Protein Adsorption and Blood Cells Adhesion to Starch-based Biomaterials",
Journal of Materials Science: Materials in Medicine, vol. 14, pp. 157-165, 2003.
"In-Vitro Assessment of the Enzymatic Degradation of Several Starch Based Biomaterials",
Biomacromolecules, vol. 4, pp. 1703-1712, 2003.
"The Role of the Interaction Coefficient in the Prediction of the Fiber Orientation in Planar Injection Moldings",
POLYMER COMPOSITES, vol. 24, issue 3, pp. 358-366, 2003.
"An Innovative Auto-Catalytic Deposition Route To Produce Calcium-Phosphate Coatings On Polymeric Biomaterials",
Journal of Materials Science: Materials in Medicine, vol. 14, issue 5, pp. 435-441, doi:10.1023/A:1023214918592, 2003.
"In-Vitro Bioactivity of Starch Thermoplastic/Hydroxylapatite Composite Biomaterials: An In-Situ Study Using Atomic Force Microscopy",
Biomaterials, vol. 24, issue 4, pp. 579-585, doi:10.1016/S0142-9612(02)00371-X, 2003.
"Effect of processing conditions on mechanical properties of pretreated gelatin samples ",
International Journal of Polymer Materials, vol. 51, issue 1-2, pp. 103, 2002.
"The biocompatibility of novel starch-based polymers and composites: in vitro studies",
Biomaterials, vol. 23, issue 6, pp. 1471-1478, 2002.
"Cell adhesion and proliferation on biomimetic calcium-phosphate coatings produced by a sodium silicate gel methodology",
Journal of Materials Science-Materials in Medicine, vol. 13, issue 12, pp. 1181-1188, 2002.
"Mechanical, dynamic-mechanical, and thermal properties of soy protein-based thermoplastics with potential biomedical applications",
Journal of Macromolecular Science-Physics, vol. B41, issue 1, pp. 33-46, 2002.
"Mechanical performance of starch based bioactive composite biomaterials molded with preferred orientation",
Polymer Engineering and Science, vol. 42, issue 5, pp. 1032-1045, 2002.
"New partially degradable and bioactive acrylic bone cements based on starch blends and ceramic fillers",
Biomaterials, vol. 23, issue 8, pp. 1883-1895, 2002.
"Starch-based biodegradable hydrogels with potential biomedical applications as drug delivery systems",
Biomaterials, vol. 23, issue 9, pp. 1955-1966, 2002.
"Structure development and interfacial interactions in high-density polyethylene/hydroxyapatite (HDPE/HA) composites molded with preferred orientation",
Journal of Applied Polymer Science, vol. 86, issue 11, pp. 2873-2886, 2002.
"Use of coupling agents to enhance the interfacial interactions in starch-EVOH/hydroxylapatite composites",
Biomaterials, vol. 23, issue 2, pp. 629-635, 2002.
"Preliminary Study on the Adhesion and Proliferation of Human Osteoblasts on Starch Based Scaffolds",
Materials Science and Engineering C, vol. 20, issue 1-2, pp. 27-33, 2002.
"Mechanical Performance of Starch Based Bioactive Composites Moulded with Preferred Orientation for Potential Medical Applications",
Polymer Engineering and Science, vol. 42, pp. 1032-1045, 2002.
"Reinforcement and Structure Development in Injection Moulding of Bone-Analogue Composites",
Journal of Applied Medical Polymers, vol. 6, pp. 23-29, 2002.
"Structure Development and Interfacial Interactions in HDPE/HA Composites Moulded with Preferred Orientation",
Journal of Applied Polymer Science, vol. 86, pp. 2866-2872, 2002.
"Glass fibre content of PP plates and their properties: Part II: Tensile mechanical properties",
Key Eng. Mat., vol. 230-2, pp. 52, 2002.
"Glass fibre contents of PP plates and their properties: Part I: Shrinkage and changes in time",
Key Eng. Mat., vol. 230-2, pp. 48, 2002.
"Molecular mobility in polymers studied with thermally stimulated recovery.I-experimental procedures and data treatment",
Journal of Thermal Analysis and Calorimetry, vol. 70, pp. 633, 2002.
"Glass transition and structural relaxation in semi-crystalline poly(ethyleneterephthalate)",
Polymer, vol. 43, pp. 4111, 2002.
"Influence of the initial experimental variables on thermally stimulated recovery results: analysis of simulations and real data on a polymeric system.",
Polymer International, vol. 51, pp. 434, 2002.
"The molecular mobility of PET studied by mechanical and dielectric spectroscopy methods",
Defects and Diffusion Forum, vol. 206-207, pp. 131, 2002.
"Drug delivery therapies I – General trends and its importance on bone tissue engineering applications",
Current Opinion in Solid State & Materials Science, vol. 6, issue 4, pp. 283-295, 2002.
"Drug delivery therapies II – Strategies for delivering bone regenerating factors",
Current Opinion in Solid State & Materials Science , vol. 6, issue 4, pp. 297-312, 2002.
"Possibilities for Recycling Cellulases After Use in Cotton Processing. Part I: Effects of End-Product Inhibition, Thermal and Mechanical Deactivation and Cellulase Depletion by Adsorption",
Applied Biochemistry and Biotechnology, vol. 101, pp. 61-75, 2002.
"Possibilities for Recycling Cellulases After Use in Cotton Processing. Part II: Separation of Cellulases from Reaction Products and Released Dyestuffs by Ultrafiltration",
Applied Biochemistry and Biotechnololy, vol. 101, pp. 77-91, 2002.
"Novel Starch Thermoplastic/Bioglass Composites: Mechanical Properties, Degradation Behaviour and In-vitro Bioactivity",
Journal of Materials and Science: Materials in Medicine, vol. 13, issue 10, pp. 939-945, doi:10.1023/A:1019800411229, 2002.
"In situ study of partially crystallized Bioglass and hydroxylapatite in vitro bioactivity using atomic force microscopy",
Journal of Biomedical Materials Research, vol. 62, issue 1, pp. 82-88, doi:DOI: 10.1002/jbm.10289, 2002.
"Synthesis and stereochemistry of 1,2,4,5-tetraarylimidazolidines
",
Journal of Chemical Research(S), vol. 11, pp. 457, 2001.
"Biocompatibility testing of novel starch-based materials with potential application in orthopaedic surgery: a preliminary study",
Biomaterials, vol. 22, issue 14, pp. 2057-2064, 2001.
"Degradation model of starch-EVOH plus HA composites",
Materials Research Innovations, vol. 4, issue 5-6, pp. 375-380, 2001.
"Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene plus hydroxyapatite composites",
Materials Research Innovations, vol. 4, issue 5-6, pp. 263-272, 2001.
" Relationships Between Processing and Mechanical Properties of Injection Moulded High Molecular Weight Polyethylene/Hydroxylapatite Composites",
Materials Research Innovations, vol. 4, pp. 263-272, 2001.
"Viscoelastic behaviour and time-temperature correspondence of HDPE with varying levels of process-induced orientation",
Polymer, vol. 42, pp. 6187-6198, 2001.
"Experimental Validation of Morphology Simulation in Glass Fibre Reinforced Polycarbonate Discs",
J. of Reinf. Plast. Comp., vol. 20, pp. 452, 2001.
"Molecular Mobility in a Thermoset as seen by TSR and DMA near Tg",
Mat. Res. Innovat, vol. 4, pp. 170, 2001.
"Structural relaxation in a polyester thermoset as seen by thermally stimulated recovery",
Polymer, vol. 42, pp. 4173, 2001.
"Porous starch-based drug delivery system processed by a microwave route",
Journal of Biomaterials Science: Polymer Edition, vol. 12, issue 11, pp. 1227-1241, 2001.
"Desorption of Cellulases from Cotton Powder",
Biotechnology Letters, vol. 23, pp. 1445-1448, 2001.
"Temperature correction of dynamic mechanical and thermomechanical analysers during heating, cooling and isothermal experiments",
Thermochimica Acta. , vol. 346, pp. 133-145, 2000.
"Phase-transfer catalysed reactions of mono- and disubstituted N-(benzylidene)-benzylamines with cinnamic acid derivatives ",
Journal of Chemical Research(S) , vol. 3, pp. 103, 2000.
"Temperature correction of dynamic mechanical and thermomechanical analysers during heating, cooling and isothermal experiments. ",
Thermochimica Acta, vol. 346, pp. 133-145, 2000.
"Chemical modification of starch based biodegradable polymeric blends: effects on water uptake, degradation behaviour and mechanical properties",
Polymer Degradation and Stability, vol. 70, issue 2, pp. 161-170, 2000.
"Effects of moisture and degradation time over the mechanical dynamical performance of starch-based biomaterials",
Journal of Applied Polymer Science, vol. 78, issue 13, pp. 2345-2357, 2000.
"Injection molding of a starch/EVOH blend aimed as an alternative biomaterial for temporary applications",
Journal of Applied Polymer Science, vol. 77, issue 6, pp. 1303-1315, 2000.
"New Degradable Load-Bearing Biomaterials Composed of Reinforced Starch Based Blends",
Journal of Applied Medical Polymers, vol. 4, pp. 1-5, 2000.
"Injection Moulding of a Starch/EVOH Blend Aimed as an Alternative Biomaterial for Temporary Applications",
Journal of Applied Polymer Science, vol. 77, pp. 1300-1315, 2000.
"Effects of Agitation Level on the Adsorption, Desorption, and Activities on Cotton Fabrics of Full Length and Core Domains of EGV (Humicola insolens) and CenA (Cellulomonas fimi)",
Enzyme and Microbial Technology, vol. 27, pp. 325-329, 2000.
"Comparing dielectric measurements on poly(ethylene terephthalate) at constant heating rates with isothermal measurements",
Polymer, vol. 40, pp. 2675-2679, 1999.
"Conformational mobility in a polymer with mesogenic side groups- dielectric and DSC studies",
Polymer, vol. 40, pp. 6545-6556, 1999.
"A simple and efficient synthesis of g-aminobutyric acid (GABA) derivatives",
Organic Preparation and Procedures International (OPPI), vol. 31, pp. 232, 1999.
"Conformational mobility in a polymer with mesogenic side groups- dielectric and DSC studies",
Polymer, vol. 40, pp. 6545-6556, 1999.
"Molecular motions in a polycarbonate composite as sudied by thermally stimulated recovery and dynamic mechanical analysis",
Macromolecular Symposium, vol. 148, pp. 437-454, 1999.
"Dynamic mechanical properties of hydroxyapatite-reinforced and porous starch-based degradable biomaterials",
Journal of Materials Science-Materials in Medicine, vol. 10, issue 12, pp. 857-862, 1999.
"Oriented composites meet tough orthopedic demands",
Modern Plastics, vol. 76, issue 5, pp. 73-75, 1999.
"Surface modification tailors the characteristics of biomimetic coatings nucleated on starch-based polymers",
Journal of Materials Science-Materials in Medicine, vol. 10, issue 12, pp. 827-835, 1999.
"Oriented Composites Meet Though Orthopaedic Demands",
Modern Plastics International, 1999.
"The enhancement of the Mechanical Properties of a High Density Polyethylene",
Journal of Applied Polymer Science, vol. 73, pp. 2473-2483,, 1999.
"Prediction of Stiffness from Orientation Data of Glass Reinforced Injection Moldings",
J. of Inj. Mold. Tech., vol. 3, pp. 126, 1999.
"Effects of Temperature on the Cellulose Binding Ability of Cellulase Enzymes",
Journal of Molecular Catalysis B: Enzymatic, vol. 7, pp. 233-239, 1999.
"New starch-based thermoplastic hydrogels for use as bone cements or drug-delivery carriers",
Journal of Materials Science-Materials in Medicine, vol. 9, issue 12, pp. 825-833, 1998.
"Phase transfer catalyzed additions. 16. Synthesis of a,b-diaminocaroxylic acid derivatives by reaction of glycine Schiff bases and azomethines",
Ann. Universite de Sofia, vol. 90, pp. 163, 1998.
"Using Nonconventional Processing Routes to Develop Anisotropic and Biodegradable Composites of Starch-Based Thermoplastics Reinforced with Bone-Like Ceramics",
Journal of Applied Medical Polymers, vol. 2, pp. 49-53, 1998.
"On the effect of the fiber orientation on the flexural stiffness of injection molded short fiber reinforced polycarbonate plates",
Polym. Comp., vol. 19, pp. 640, 1998.
"The Use of Birefringence for Predicting the Stiffness of Injection Moulded Polycarbonate Discs",
Polym. Eng. Sci., vol. 38, pp. 1770, 1998.
"Preparation of ethyl esters of protected 3-aryl-2,3-diaminopropanoic acids by reaction of ethyl N-(diphenylmethylene)glycinate and azomethines",
Synthetic Communications, vol. 27, issue 11, pp. 1849-1856, 1997.
"Structure development and control of injection-molded hydroxylapatite-reinforced starch/EVOH composites",
Advances in Polymer Technology, vol. 16, issue 4, pp. 263-277, 1997.
"Processing and In-Vitro Degradation of Starch/EVOH Thermoplastic Blends",
Polymer International, vol. 43, pp. 347-353, 1997.
"Structure Development and Control of Injection Moulded Hydroxylapatite Reinforced Starch/EVOH Composites",
Advances in Polymer Technology, vol. 16, pp. 263-277, 1997.
"Treatments to Induce the Nucleation and Growth of Apatite-Like Layers on Polymeric Surfaces and Foams",
Journal of Materials Science: Materials in Medicine, vol. 8, pp. 897-905, 1997.
"Using Nonconventional Processing to Develop Anisotropic and Biodegradable Composites of Starch-Based Thermoplastics Reinforced with Bone-Like Ceramics",
Medical Plastics and Biomaterials, vol. 4, pp. 46-50, 1997.
"Mechanical behavior of injection-molded starch-based polymers",
Polymers for Advanced Technologies, vol. 7, issue 10, pp. 784-790, 1996.
"Crystallinity and Structural Changes in HA Plasma-Sprayed Coatings Induced by Cyclic Loading in Physiological Media",
Journal of Materials Science: Materials in Medicine, vol. 7, pp. 407-411, 1996.
"Mechanical Behaviour of Injection Moulded Starch Based Polymers",
Journal of Polymers for Advanced Technologies, vol. 7, pp. 784-790, 1996.
"Characterization of two biodegradable polymers of potential application within the biomaterials field",
Journal of Materials Science-Materials in Medicine, vol. 6, issue 12, pp. 786-792, 1995.
"Liquid-Phase Sintering of Hydroxyapatite by Phosphate and Silicate Glass Additions - Structure and Properties of the Composites",
Journal of Materials Science-Materials in Medicine, vol. 6, issue 6, pp. 348-352, 1995.
"Characterisation of Two Biodegradable Polymers of Potential Application Within the Biomaterials Field",
Journal of Materials Science: Materials in Medicine, vol. 6, pp. 786-792, 1995.
"Microstructural Characterization of Glass-Reinforced Hydroxyapatite Composites",
Biomaterials, vol. 15, issue 1, pp. 5-10, 1994.
"Stability of Hydroxylapatite Plasma-Sprayed Coated Ti-6Al-4V under Cyclic Bending in Simulated Physiological Solutions",
Journal of Materials Science: Materials in Medicine, vol. 5, pp. 457-462, 1994.
"The Morphology and Optical Characteristics of Black Solar Selective Coatings",
Plating and Surface Finishing, vol. 79, issue 1, pp. 46-52, 1992.
"Concepção e Ensaio de um Protótipo de Painel Solar para Testar Superfícies Selectivas",
Corrosão e Protecção de Materiais, vol. 11, issue 1, pp. 5-10, 1992.
"Contribuição para o Estudo da Inibição da Corrosão de Ligas de Alumínio em Soluções Aquosas",
Corrosão e Protecção de Materiais, vol. 11, issue 2, pp. 14-18, 1992.
