] Filters: Author is Bevis, MJ [Clear All Filters]
"Shear controlled orientation in injection moulding of starch based blends intended for medical applications",
Plastics Rubber and Composites, vol. 32, issue 4, pp. 173-181, 2008.
"R. A. Sousa, R. L. Reis, A. M. Cunha, M. J. Bevis, Non-Conventional Processing of Short Fibre Reinforced Composites",
Plastic, Rubber, Composites: Macromolecular Engineering, vol. 33, issue 6, pp. 249-259, 2005.
"Integrated compounding and injection moulding of short fibre reinforced composites",
Plastics Rubber and Composites, vol. 33, issue 6, pp. 249-259, 2004.
"Bi-composite sandwich moldings: Processing, mechanical performance and bioactive behavior",
Journal of Materials Science-Materials in Medicine, vol. 14, issue 5, pp. 385-397, 2003.
"Coupling of HDPE/hydroxyapatite composites by silane-based methodologies",
Journal of Materials Science-Materials in Medicine, vol. 14, issue 6, pp. 475-487, 2003.
"Processing and properties of bone-analogue biodegradable and bioinert polymeric composites",
Composites Science and Technology, vol. 63, issue 3-4, pp. 389-402, 2003.
"Structural development of HDPE in injection molding",
Journal of Applied Polymer Science, vol. 89, issue 8, pp. 2079-2087, 2003.
"Bi-Composite Sandwich Mouldings: Processing, Mechanical Performance and Bioactive Behaviour",
Journal of Materials: Materials in Medicine, vol. 14, pp. 385-397, 2003.
"Coupling of HDPE/Hydroxyapatite Composites by Silane Based Methodologies",
Journal of Materials: Materials in Medicine, vol. 14, pp. 475-487, 2003.
"Processing and Properties of Bone-Analogue Biodegradable and Bioinert Polymeric Composites",
Composites Science and Technology, vol. 63, pp. 389-402, 2003.
"Structural Development of HDPE in Injection Moulding",
Journal of Applied Polymer Science, vol. 89, pp. 2079-2087, 2003.
"Mechanical behaviour of polyethylene/hydroxyapatite bone-analogue composites moulded with an induced anisotropy",
Bioceramics 14, pp. 469-472, 2002.
"Mechanical performance of starch based bioactive composite biomaterials molded with preferred orientation",
Polymer Engineering and Science, vol. 42, issue 5, pp. 1032-1045, 2002.
"Structure development and interfacial interactions in high-density polyethylene/hydroxyapatite (HDPE/HA) composites molded with preferred orientation",
Journal of Applied Polymer Science, vol. 86, issue 11, pp. 2873-2886, 2002.
"Mechanical Performance of Starch Based Bioactive Composites Moulded with Preferred Orientation for Potential Medical Applications",
Polymer Engineering and Science, vol. 42, pp. 1032-1045, 2002.
"Reinforcement and Structure Development in Injection Moulding of Bone-Analogue Composites",
Journal of Applied Medical Polymers, vol. 6, pp. 23-29, 2002.
"Structure Development and Interfacial Interactions in HDPE/HA Composites Moulded with Preferred Orientation",
Journal of Applied Polymer Science, vol. 86, pp. 2866-2872, 2002.
"Relationship between processing and mechanical properties of injection molded high molecular mass polyethylene plus hydroxyapatite composites",
Materials Research Innovations, vol. 4, issue 5-6, pp. 263-272, 2001.
" Relationships Between Processing and Mechanical Properties of Injection Moulded High Molecular Weight Polyethylene/Hydroxylapatite Composites",
Materials Research Innovations, vol. 4, pp. 263-272, 2001.
"Viscoelastic behaviour and time-temperature correspondence of HDPE with varying levels of process-induced orientation",
Polymer, vol. 42, pp. 6187-6198, 2001.
"Injection molding of a starch/EVOH blend aimed as an alternative biomaterial for temporary applications",
Journal of Applied Polymer Science, vol. 77, issue 6, pp. 1303-1315, 2000.
"Structure and properties of hydroxylapatite reinforced starch bone-analogue composites",
Bioceramics, pp. 669-672, 2000.
"Injection Moulding of a Starch/EVOH Blend Aimed as an Alternative Biomaterial for Temporary Applications",
Journal of Applied Polymer Science, vol. 77, pp. 1300-1315, 2000.
"Oriented composites meet tough orthopedic demands",
Modern Plastics, vol. 76, issue 5, pp. 73-75, 1999.
"Oriented Composites Meet Though Orthopaedic Demands",
Modern Plastics International, 1999.
"Oriented Composites Meet Though Orthopaedic Demands",
Modern Plastics International, 1999.
"The enhancement of the Mechanical Properties of a High Density Polyethylene",
Journal of Applied Polymer Science, vol. 73, pp. 2473-2483,, 1999.
"Non-Conventional Processing Routes on the Development of Anisotropic and Biodegradable Composites of Starch Based Thermoplastics Reinforced with Bone-Like Ceramics",
Medical Plastics. Degradation Resistance and Failure Analysis, New York, pp. 177-182, 1998.
"Using Nonconventional Processing Routes to Develop Anisotropic and Biodegradable Composites of Starch-Based Thermoplastics Reinforced with Bone-Like Ceramics",
Journal of Applied Medical Polymers, vol. 2, pp. 49-53, 1998.
"Structure development and control of injection-molded hydroxylapatite-reinforced starch/EVOH composites",
Advances in Polymer Technology, vol. 16, issue 4, pp. 263-277, 1997.
"Load-Bearing and Ductile Hydroxylapatite/Polyethylene Composites for Bone Replacement",
Bioceramics 10, Elsevier Science, Amsterdam, pp. 515-518, 1997.
"Processing and In-Vitro Degradation of Starch/EVOH Thermoplastic Blends",
Polymer International, vol. 43, pp. 347-353, 1997.
"Structure Development and Control of Injection Moulded Hydroxylapatite Reinforced Starch/EVOH Composites",
Advances in Polymer Technology, vol. 16, pp. 263-277, 1997.
"Using Nonconventional Processing to Develop Anisotropic and Biodegradable Composites of Starch-Based Thermoplastics Reinforced with Bone-Like Ceramics",
Medical Plastics and Biomaterials, vol. 4, pp. 46-50, 1997.
"Mechanical behavior of injection-molded starch-based polymers",
Polymers for Advanced Technologies, vol. 7, issue 10, pp. 784-790, 1996.
"Improvement of the Mechanical Properties of Hydroxylapatite Reinforced Starch Based Polymers Through Processing",
Polymers in Medicine & Surgery, Ed. J. Courtney et. al., London, pp. 195-202, 1996.
"Mechanical Behaviour of Injection Moulded Starch Based Polymers",
Journal of Polymers for Advanced Technologies, vol. 7, pp. 784-790, 1996.
